 |
| Q. |
What is Creom ? |
| A. |
It is a moisture suppressant for use in new-build construction and refurbishment of existing floors. |
| |
|
| Q. |
How does it work ? |
| A. |
It suppresses residual moisture in newly laid concrete and sand & cement screeds. |
| |
|
| Q. |
How much does it cost ? |
| A. |
£99.75 for a 5 litre container. |
| |
|
| Q. |
How do you apply it ? |
| A. |
With a lambs wool roller or spray. |
| |
|
| Q. |
Does it have to be diluted ? |
| A. |
No – it must not be diluted. You use it straight from the container - no mixing required. |
| |
|
| Q. |
How many coats do I apply ? |
| A. |
It is a 2 coat application process. |
| |
|
| Q. |
How soon after putting down the first coat can I apply the second coat ? |
| A. |
As soon as the first coat is touch dry. (usually 1- 4 hours). |
| |
|
| Q. |
How do I wash out my tools ? |
| A. |
In warm soapy water. |
| |
|
| Q. |
What size containers does it come in ? |
| A. |
In 5 litre plastic containers. |
| |
|
| Q. |
What coverage do you get from a 5 litre container ? |
| A. |
On concrete floors typically 40-50m2; on sand and cement screeds typically 25-30m2. |
| |
|
| Q. |
The subfloor is soaking up the Creom - is this OK ? |
| A. |
Normally, this means the floor is particularly porous, but you should use less Creom on the 2nd coat. However, if the overall coverage rate is substantially lower than 25m2 per unit, this could indicate a faulty screed. In such circumstances, please contact Creom Technical Services. |
| |
|
| Q. |
What smoothing compounds can I lay above and below Creom ? |
| A. |
All of the well known proprietary products can be laid direct to Creom treated surfaces. When laying a smoothing compound below Creom, check that it is not moisture sensitive and suitable for overlaying with a dpm. If in doubt consult Technical support. |
| |
|
| Q. |
Up to what RH can I use Creom ? |
| A. |
98% when laying all materials except rubber, wood and impervious-backed carpet. When laying rubber flooring, wood or impervious-backed carpet a lower RH in the sub-floor is required. Speak to Creom Technical Support prior to commencing the job to see if Creom is suitable. |
| |
 |
| |
|
| The information contained on this website is based on our experience and investigations. The variety and range of associated materials and working conditions cannot be influenced or individually checked by us. The quality of your work depends, therefore, on your individual professional judgement and product usage. If in any doubt, conduct a small test or seek additional technical advice. In all cases, the manufacturer's installation / application procedures for the respective associated latex, adhesive, floorcoverings etc should be carefully followed. |
|
|
